CVE-2026-74653 serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx
A local attacker can cause a CPU livelock and system hang by repeatedly opening the LPC32xx UART port, triggering an infinite interrupt storm in the Linux kernel.
- Exploited in the wild
- Not known
- Login needed
- Any signed-in user
- Attackable
- Local or same network only
- Victim action needed
- Not needed
- Fix
- Available
What is CVE-2026-74653?
CVE-2026-74653 is a denial of service vulnerability in Linux, published on 22 Aug 2026. It can only be exploited from the same machine or local network, with no action from the victim.
Official description
In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx
The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT (0x0c) but LSR.DR is clear. A character timeout is only cleared by reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is set, so nothing ever clears the condition. The interrupt is level-triggered and re-fires immediately, so on a single-core ARM926 the resulting interrupt storm livelocks the CPU.
It is reproducible when userspace repeatedly opens the front-panel port (ttyS1): serial8250_do_set_termios() re-enables interrupts on unlock and the handler then spins forever with iir=0xcc lsr=0x60 ier=0x05, tripping the soft-lockup detector in serial8250_handle_irq_locked().
LPC32xx has no dedicated 8250 glue driver, it's driven by the generic 8250_of. Add a hardware specific handle_irq for PORT_LPC3220, wired up in of_platform_serial_setup() the same way fsl8250_handle_irq is installed. The handler follows dw8250_handle_irq(): on an RX timeout with an empty FIFO (LSR.DR and LSR.BI clear) it does one throwaway RHR read to clear the condition, then calls serial8250_handle_irq_locked(). No real received data is ever discarded, and it is a no-op on healthy UARTs which never report a timeout with DR clear.
This is the same class of bug already worked around in other 8250 drivers; see commit 424d79183af0 ("serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt") which reports the identical iir=0xcc/lsr=0x60. See also UART_RX_TIMEOUT_QUIRK in 8250_omap, and the note in 8250_bcm7271.
Which versions are affected by CVE-2026-74653?
How do I fix CVE-2026-74653?
Apply the vendor's patch.
Upgrade, then put limits on request size, rate and nesting depth so one client cannot exhaust the service. More about Denial of service.
Is CVE-2026-74653 being exploited?
There is no known exploitation of CVE-2026-74653 in the wild and no public exploit code.
Sources
Also known as AZL-97184, BELL-CVE-2026-74653, DEBIAN-CVE-2026-74653, GHSA-hpjx-f9r3-xj76, UBUNTU-CVE-2026-74653.