openSUSE-SU-2021:0706-1 Security update for monitoring-plugins-smart

This update for monitoring-plugins-smart fixes the following issues:

monitoring-plugins-smart was updated to 6.9.1:

This is a security-release (boo#1183057)

• Fixes the regular expression for pseudo-devices under the /dev/bus/N path. from 6.9.0
• Allows using PCI device paths as device name(s) (#64)
• Introduce new optional parameter -l/–ssd-lifetime) which additionally checks SMART attribute 'Percent_Lifetime_Remain' (available on some SSD drives). (#66 #67) from 6.8.0
• Allow skip self-assessment check (–skip-self-assessment)
• Add Command_Timeout to default raw list from 6.7.1
• Bugfix to make –warn work (issue #54) from 6.7.0
• Added support for NVMe drives from 6.6.1
• Fix 'deprecation warning on regex with curly brackets' (6.6.1) from 6.6.0
• The feature was requested in #30 . This PR adds the possibility to use 3ware,N and cciss,N drives in combination with the global -g parameter.
• Furthermore this PR adjusts the output of the plugin when the -g is used in combination with hardware raid controllers. Instead of showing the logical device name (/dev/sda for example), the plugin will now show the controller with drive number from 6.5.0:
• Add Reported_Uncorrect and Reallocated_Event_Count to default raw list.
• As of 6.5 the following SMART attributes are by default checked and may result in alert when threshold (default 0 is reached): 'Current_Pending_Sector,Reallocated_Sector_Ct,Program_Fail_Cnt_Total, Uncorrectable_Error_Cnt,Offline_Uncorrectable,Runtime_Bad_Block, Reported_Uncorrect,Reallocated_Event_Count'

• Update to version 6.4

  • Allow detection of more than 26 devices / issue #5 (rev 5.3)
  • Different ATA vs. SCSI lookup (rev 5.4)
  • Allow script to run outside of nagios plugins dir / wiki url update (rev 5.5)
  • Change syntax of -g parameter (regex is now awaited from input) (rev 5.6)
  • Fix Use of uninitialized value $device (rev 5.7)
  • Allow multiple devices for interface type megaraid, e.g. 'megaraid,[1-5]' (rev 5.8)
  • allow type 'auto' (rev 5.9)
  • Check selftest log for errors using new parameter -s (rev 5.10)
  • Add exclude list (-e) to ignore certain attributes (5.11)
  • Fix 'Use of uninitialized value' warnings (5.11.1)
  • Add raw check list (-r) and warning thresholds (-w) (6.0)
  • Allow using pseudo bus device /dev/bus/N (6.1)
  • Add device model and serial number in output (6.2)
  • Allow exclusion from perfdata as well (-E) and by attribute number (6.3)
  • Remove dependency on utils.pm, add quiet parameter (6.4)

• Drop not longer needed patch:

  • enable_auto_interface.patch (obsolete, type auto was added upstream in v5.9).